DAN-IP6C31-S26


· H.264 Video Compression
· G.726 Audio Compression
· Picture Resolution Up to D1, 720X576
· Frame Rate up to 25 f/s(PAL), 30 f/s(NTSC)
· Dual video stream transmission
· High die-cast aluminum construction
· Left&Right Rotation Range:Continuous 360°Rotation
· Minimum illumination of 0.01Lux in B/W model
· Pan 0.01^(o)~180^(o)/S, Tilt 0.01^(o)~120^(o)/S, Preset: 500^(o)/S
· Pan Tilt accuracy 0.07^(o)
· Comprehensive english OSD menu; RS-485 control Pelco-P&D compatible
· Build-in fan and heater IP66-rated waterproof
· TCP, UDP, HTTP Supported
· Dynamic IP and PPPoE
· Support Mobile phone

Camera Parameters

SubModel
DAN-IP6C31-S26
Sensor
1/4" SONY Exview HAD CCD
Horizontal Resolution
480TVL
Camera
SONY 980P
Focus Length
F3.5mm~91.0mm
Optical Zoom
26X
Digital Zoom
12X
Minimum Illumination
1.0 Lux / 0.01 Lux
VideoOutput
1Vp-p75 ohms
Back Light Compensation
Auto
Focus
Auto/Manual
Iris
Auto/Manual
S/N Ratio
50dB
Electric Shutter
1/1~1/10000s

Dome Parameters

Power Supply
AC24V, 50W
Speed
Manual: 0.01^(o)~180^(o)/S(Pan), 0.01^(o)~120^(o)/S(Tilt); Preset: 500^(o)/S
Angle
Pan:360^(o)continuous pan rotation; Tilt:90^(o)(Auto Flip)
Presets Positions
220; Preset Accuracy:0.07^(o)
Auto Scan
8 auto scan tracks, left & right boundaries and scan speed can be set
Auto Cruising
8 cruising tracks, each has 32 preset positions, dwell time can be set
Pattern Tour
4 groups, each one with 180s memory
Guard Location
The dome will rotate back to preset position after a period of vacant time
Data Communication
RS-485
Protocols
PELCO-P, PELCO-D
Baud Rate
2400/4800/9600bps
Working Environment
Operating Humidity: 0~95%; Operating Temperature:-35°~ +60°
External port
Audio input
1 channel, RCA port (LINEAR)
Audio output
1 channel, RCA port (LINEAR)
Video output
1 channel, BNC port analog output
Network port
1 pc, RJ45 10M/100Mbps self-adaptable Ethernet port
Serial port
1 pc, standard RS485 serial port
Alarm input
1 channel switch
Alarm output
1 channel switch


Interface description

A. RJ45 socket of standard network
B. Audio input, connecting to active device.
C. Audio output, connecting to active device.
D. Analog video output interface, standard BNC interface.
E. Reset button, it is used to restore factory default parameters of device, including IP address and user password.
F. RS485 interface
G. Power supply interface, connecting to 24V DC through voltage stabilizer, please use matching voltage stabilizer power supply.
H. 1 channel alarm input/output
Dantek Telecomunicatii SRL Regele Carol 28 Dragasani Valcea RO-245700 Tel: +40250811247 Fax: +40250813056
Copyright © 2017 Dantek. All Rights Reserved.