MCB1S1-20-I WDM Media Converter Bi-Directional 1FX+1TX LPF SC/PC Connector 20-40-60-80-100-120 Km


Dantek 10/100Base-TX/FX Bridg Media Converter complies with IEEE802.3 and IEEE 802.3u Standards. MC series enables network managers to connect 10 Mbps and 100 Mbps twisted pair network segments and active equipment to fiber optic cabling more cost-effectively than ever.WDM Technology Combines Dual Fiber Cables into Single Fiber .Greatly save the Installation cost of Expensive Fiber Cable.  Both a media and data rate converter, MC series features 10/100 auto-negotiation on the twisted pair port while the fiber port operates at 100 Mbps. MCI series converters are ideal for any premises FTTD, LAN-to-LAN or LAN-to-WAN fiber networking applications.

1.KEY FEATURES
Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX
10/100Mbps and full/half duplex automatically configure in TP port
MDI/MDI-X Auto Negotiation
Max transmit packet(s):1600bytes
WDM Technology Combines Dual Fiber Cables into Single Fiber .Greatly save the Installation cost of Expensive Fiber Cable
LFP Function(Link fault pass through)
1. ON--- The function is usable.
TX=>Fiber : If TX port link down , then converter will forced fiber to link down.
Fiber =>TX: If Fiber port link down, the media converter will forced TX port to link down.
2. OFF---The function is disable
Notice: when you turn the switch to ON or OFF to change current mode, please make sure power turn off and turn on again!
2. TECHNICAL SPECIFICATION
Standard
Wavelength
Fiber cable
Connector
Cable Model and Length
Buffer memory Max transmit packet(s):                 
Switching mechanism Forward&Filter Rate:
MAC Address and self-learning
LED Indicators
Power supply
Environment
Size
Emission
802.3 10B-T, 802.3u 100b-Tx&100b-Fx, 802.3x, 802.1.p
TX1310nm/RX1310nm or BIDI TX1310nm/RX1550nm; TX1550nm/RX1310nm
8.3/125, 8.7/125, 9/125 or 10/125single-mode
RJ-45 Jack and Fiber optic connectors: SC connector
Twisted pair Cat.5 UTP Cable: 100m
128Kbyte
1600bytes Store &Forward
10b-T( 14,880pps-64bytes), 100b-Tx/Fx
(148,800pps-64Bytes)
1K
POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
2A +5V
Operating temperature:32 to 122F(0 to 60℃)
Storage temperature : -4 to 140F (-20 to 70℃)
Relative humidity: 5% to 90%
26.5mm(H)x 70.5mm(W) x 94mm(D)
FCC/CE
Fiber optic details:
Multimode 2 Km Min TX TWR: -14dB Max Tx PWR -8dB Rx-sensitivity (-32dBm) Link Budget ( 18.0dB)
Single mode 20 Km Min TX TWR: -15dB, Max Tx PWR -8dB, Rx-sensitivity (-32dBm), Link Budget ( 17.0dB)
Single mode 40 km Min TX TWR: -10dB, Max Tx PWR -6dB, Rx-sensitivity (-34dBm), Link Budget ( 24.0dB)
Single mode 60 km Min TX TWR: -5dB, Max Tx PWR 0dB, Rx-sensitivity (-34dBm), Link Budget ( 29.0dB)
Single mode 80 km 1550nm DFB laser, Min TX TWR: -5dB, Max Tx PWR db,  Rx-sensitivity (-34dBm), Link Budget ( 29.0dB)
3.ORDERING INFORMATION
MCB1S1-20-I

MCB2S1-20-I

MCM1-2-I
MCM2-2-I
MCS1-20-I
MCS1-40-I
MCS1-60-I
MCS1-80-I
MCS1-100-I
MCS1-120-I
10/100 Base-TX/FX Single Fiber BIDI Converter 20Km SC Connector
(TX:1310 RX:1550 over one Fiber)
10/100 Base-TX/FX Single Fiber BIDI Converter 20Km SC Connector
(TX:1550 RX:1310 over one Fiber)
10/100 Base-TX/FX Bridge Converter 2Km SC Connector (MM)
10/100 Base-TX/FX Bridge Converter 2Km ST Connector (MM)
10/100 Base-TX/FX Bridge Converter 20Km SC Connector (SM)
10/100 Base-TX/FX Bridge Converter 40Km SC Connector (SM)
10/100 Base-TX/FX Bridge Converter 60Km SC Connector (SM)
10/100 Base-TX/FX Bridge Converter 80Km 1550nm DFB Laser SC Connector (SM)
10/100 Base-TX/FX Bridge Converter 80Km 1550nm DFB Laser SC Connector (SM)
10/100 Base-TX/FX Bridge Converter 80Km 1550nm DFB Laser SC Connector (SM)
Dantek Telecomunicatii SRL Regele Carol 28 Dragasani Valcea RO-245700 Tel: +40250811247 Fax: +40250813056
Copyright © 2017 Dantek. All Rights Reserved.