MFT-A3 Multimode To Single Mode Gigabit Fiber Media Converter

Dantek MTF-A3 is used to convert multi-mode fiber signal to single-mode or single-mode fiber signal to single-mode equivalent that extends the long span fiber connections easily and inexpensively. This media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack (up to 14 units) for use at a central wiring closet.
1. Key Features
- Support 1000Base-SX/LX Multi-mode to Single-mode
- Support 622M SONET OC-12 multi-mode to single-mode conversion
- Support 155M ATM OC-3/ 100M Fast Ethernet multi-mode to single-mode conversion
- Easy Fiber Transceiver Upgradeable
- Good for Application to Extend the Network Distance Up to 70Km
- Standalone or composite applications
2. Technical Specification
- Standards Compliance IEEE 802.3z
- Gigabit Ethernet 1000Base-SX/LX
- Data Transfer Rate:2000Mbps/Full-duplex
- 622M SONET OC-12
- 155M OC-3/STM-1 / IEEE802.3u 100Base-FX
- Network Interface
- LC Connector
- Fiber Cable: 50/125, 62.5/125, or 100/140μm (multi-mode) 8.3/125, 8.7/125, 9/125 or 10/125μm (single-mode)
- Data Transfer Rate: 100Mbps, 155Mbps, 622 Mbps, 1000 Mbps
- LED Indicators: PW1,Tx/Fail, Rx/Fail, PW2, Tx/Fail, Rx/Fail,
- Power Requirement: 2.0A +5VDC
- Ambient Temperature: 0 to 50°C
- Humidity: 5% to 90%
- Dimensions: 26.2(H) x 70.4(W) x 94(D) mm
- Certification: FCC Part 15 Class A, CE Mark
3. Order information:
Multimode To Single Mode Gigabit Fiber Converter SM FP laser 10km LC Connector
Multimode To Single Mode Gigabit Fiber Converter SM DFB laser 70km LC Connector
Dantek Telecomunicatii SRL Regele Carol 28 Dragasani Valcea RO-245700 Tel: +40-722-574445 Tel: +40-744-648856
Copyright © 2021 Dantek. All Rights Reserved.